Common Fault Alarm and Solution Of Fiber Laser Cutting Machine !

Alarm name

Floating head alarm

Body capacitance becomes smaller

1. Nozzle is not installed

2.The ceramic ring is loose

3.Wiring problem

Abnormally large capacitance

Calibration problem, re-calibrate

2.There is a problem with the servo wiring, please check all servo

plugs.

 Z+ limit trigger

Z- limit trigger

1.The network cable is not connected

2. Reset height controller IP

3 Height controller is closed

Servo alarm

1. Servo is not turned on

2. There is a

problem with the servo wiring, please check all servo plugs.

Y+ Limit

Limit trigger

Y-Limit

Something hits the limit

X+ Limit

Replace the limit problem

X- Limit

The adapter board is faulty

The cutting effect suddenly deteriorates

2. The nozzle is not clean or broken

3. Insufficient cutting air pressure

4.镜The lens is dirty or damaged